iii
Important Information
3.0
Important Information!
3.1
All persons responsible for fitting, adjustment, and daily use of the devices
discussed in these instructions must be familiar with and understand all safety
aspects of the devices mentioned. In order for our products to be used
successfully, you must:
Read and understand all instructions and warnings.
Maintain our products according to our instructions on care and maintenance.
Devices should be installed and adjusted by a trained technician.
All programming and configurations MUST be completed by a certified ATP or
trained technician.
This installation manual contains programming instructions and statements that
are meant to be followed by a certified ATP of trained technician.
Intended Use
3.2
The i-Drive control system allows the use of alternative input devices to drive an
electric wheelchair. Up to six input devices such as an egg switch, proximity pad,
Sip & Puff, head array, and tray array are supported. The i-Drive system relies
primarily on two types of input interpretations: switched and proportional. The
interpretation used for each channel is dependent on the function assigned to
it. The i-Drive system includes software that can display real-time diagnostics
data, such as the desired direction of motion, to help setup and verify a
configuration.
