33
Q-Logic Installation
12.0
Egg Switch Function
If you would like to change the function of the egg switch to
Mode
or
Toggle
Forward
and
Reverse
:
1.
Reconnect the Q-Logic Handheld Programmer (follow
Steps 1
-
7
from
Setup
).
2.
On the Q-Logic Programmer, select
Program Adjustments
option.
3.
In the
Program Adjustments
menu, with the
Up & Down
buttons, navigate to
Specialty Control
and select with the
Right
button.
4.
In the
Specialty Control
menu, navigate with the
Up & Down
buttons to
Proportional
Head 3
-
Direction
and with the
Right
button,
select.
5.
In the
Proportional Head 3
-
Direction
menu, navigate to
Switch Options/Timing
with the
Up
& Down
buttons and select with the
Right
button.
6.
In the
Switch Options
/
Timing
menu, navigate with the
Up & Down
buttons to
m:Mode
Jack Switch Type
and toggle with the
Plus & Minus
buttons ± to Mode to enable mode
switch with the egg switch, or
Toggle
for forward/reverse toggle.
7.
After configuring the back pad, disconnect the Q-Logic™ Programmer and restart the
chair’s electronics ( follow
Steps 10
-
13
from
Setup
) , or continue to configure other
operations.
