9
Installation Instructions
9.0
DANGER
Ensure the dongles/sensors are plugged into the proper ports. Attaching to the
incorrect port could lead to unexpected movements or direction changes of the
chair.
Step 3:
Plug each sensor/dongle (C5) into ports. Slightly pull the cable to ensure it has been securely placed
into port.
Step 4:
Once the sensors are installed, locate the carrier plate with the thumb screws. Install the carrier
plate into place by tightening the thumb screws.
Place even pressure firmly on the end of the cable for easier installation.
If the sensors are not properly connected to their ports on the interface the thumb screws will
not completely secure to interface.
3
4
C5
