29
Q-Logic Installation
12.0
Setup for Q-Logic 2
1.
Power off the chair with the power button on the joystick or display.
2.
Ensure all the cords for the display are properly connected to the chair.
3.
Connect the i-Drive Alternative Control into the port on the bottom of the display with the
9-pin connector.
4.
With the chair powered off, open up the app on a Bluetooth enabled device and log in using
the email and password provided to you. Power the chair on and connect to the
application.
5.
Plug in the Q-Logic Programmer to the back of the Q-Logic Display.
6.
On the Programmer, select the
Program Adjustment
option.
7.
In the
Program Adjustment
menu, navigate with the
Up & Down
buttons to the
Specialty
Control
option and with the
Right
button,
select.
8.
In the Specialty
Control
menu, navigate with the
Up & Down
buttons
to
Active Device
and
toggle with the
Plus & Minus
buttons ± to
Proportional Head 3
-
Direction
.
9.
With the
Up & Down
buttons, scroll down to
Proportional Head
-
3 Direction
folder. With
the
Right
button,
select and enter folder. Scroll down to
Joystick Setup
folder and select.
10. In the
Joystick
Setup
menu, with the
Up & Down
buttons, scroll down and select
Calibrate.
Select
Okay
.
DANGER
Disengage the motors before programming the chair.
WARNING
Please manually disengage both drive motors before utilizing the
Setup Wizard,
Diagnostics,
and
Config.
If motors are not disengaged, the chair could move
during setup.
