30
Q-Logic Installation
12.0
WARNING
Powering off the chair completely before operation is mandatory.
11. The Q-Logic programmer will read,
Roll around joystick in two full circles
.
12.
Go to the i-Drive application on the Phone/Tablet/PC Device. Select
Config Chair
tab. Select
Calibrate Chair.
Click
Okay.
13.
Wait until the calibration finalizes, then select
Okay
with the Q-Logic programmer and
verify the calibration was successful. (If calibration was not successful, power off the chair
and repeat
Steps 5
-
12.)
14. Return to the Main Menu and exit the Q-Logic programming.
15. Unplug the Q-Logic handheld programmer.
16. Power chair off.
17. The chair is now programmed to recognize the i-Drive. Power the chair back on.
18. Check your configuration on the diagnostics tab. If all is working correctly, your i-Drive is
ready for use. Re-engage your motors.
