ENGLISH
37
37
BLADE MAINTENANCE
Lubricate the blades with light oil or diesel regularly.
The blades of this machine are high quality metal and do
not need to be filed. If accidentally, the blade catches on a
metallic surface, touches a rock or any other hard object,
a small breakage could occur.
If this small breakage does not impede the blades
functioning correctly, then you can carry on using the
machine. If, on the other hand, the machine does not work
properly, then take the machine to your nearest after sales
dealer.
Every two hours add grease to the blade.
GEAR BOX
Every twenty hours add grease to the gearbox.
TRANSPORT
Never pick up or carry the machine while the engine is
running. It is always necessary too to turn off the motor
before transporting the machine between work locations.
Wait five minutes after the machine has been stopped
to ensure that the machine cools down before storing or
transporting. The exhaust pipe of the machine will remain
hot after the motor shutdown.
Hold the machine by the front handle when the machine is
not running and always at a safe distance from your body.
When transporting or storing the machine cover the blade
with a blade protector. A proper use of the machine will
result in a reduced probability of accidental damages with
the cutting elements.
If you are going to transport the machine in a vehicle, securely
fasten it to avoid the machine slipping or tumbling over.
STORAGE
Once the machine has been stopped, wait for five
minutes so that the machine cools down before storing
the machine. The exhaust pipe will still be hot after the
machine has been turned off. Do not store the machine in
a place close to heat sources, inflammable products, dry
grass, wood, gases and petrol.
Store this machine in a place not accessible to children
and secure. It should also be dry, clean and within the
temperature range 0ºC and 45ºC.
Before storing the machine follow the points of the
maintenance chapter.
Always set the blade guard.
Keep the machine in its box, on a flat surface If you are
going to store the machine in a closed area, empty the
petrol and oil deposits as vapours could cause a fire if
near inflammable products. If, the petrol deposit has to be
emptied, this must be done outdoors and following your
local recycling normative.
To reduce fire hazard, keep the engine, silencer and petrol
tank area free of cutted material and grease.
Clean the machine and the blade. After cleaning the
blade, place a small quantity of oil on the blade.
5.2 Repair service
Our after-sales service responds to your questions
conceming maintenance and repair ofyour product as well
as spare parts.
Exploded views and information on spare parts can also
be found under:
Our customer consultants answer your questions
conceming best buy, application and adjustment of
productsand accessories.
5.3 Warranty
Warranty card
lncluded in the documentation that accompanies this
equipment, you should find the warranty card. You should
fill out the card completely and retum to vendar with a copy
of purchasing receipt or invoice and you should receive a
receipt.
Note: lf you cannot find the warranty card within
the documentation,youmust ask for it through your
supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or
repaired otherthan themanufacturer.
5.4 Disposal and recycling
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
OnlyforEC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/
EC for Waste Electrical and Electronic
Equipment and its implementation into national
right,power tools that are no longer usable
must be collected separately and disposed of
in an environmentally correct manner.
Subject to change wlthout notlce.
