Staufenbiel L-13 BLANIK, Instruction Manual

Page: 24 / 52

EN
24
3. Connect the rest half wing to the rods, slide it in
slightly. Make sure there is no slot between this one
main wing panels. If not, you have to check the obst-
ruction out.
4. The wing shoul be a „V“ shape after installing wing
tube.
5. Connect the servo leads from the wing with the
extension wires in the fuselage. Use the labels on the
servo leads to match all four servos.
6. Be sure to pull the wire leads from the canopy
hatch the same time to avoid any tangling to prevent
the main wing from fully installation.