Page 48
CPV550
CURSOR SPEED
Selects the preferred speed among Low, Medium and High for the cursor in the Chart
page and within the menu.
MEASURE DISTANCE
When this function is turned on allows a distance to be measured between two points
using the ShuttlePoint knob and
[ENTER]
key.
WINDOWS SETUP
This menu selection allows the data windows to be customized on the Chart and
Navigation pages.
LANGUAGE
Allows changing the language for menus and data screens.
AUTO INFO
By default when the cursor is moved over a buoy, Mark or other item a popup window will
show information of the item. This menu item allows the window to be turned on or off.
CURSOR WINDOW
By default when the cursor is moved a window is shown with the Lat/Lon Distance and
bearing from the vessels location to the cursor. This selection allows the window to be
turned off.
CURSOR POSITION
The position of the cursor (vessels location) can be customized so it
centered in the middle
or centered on the bottom of the chart page. The default is “Center”.
COG TIME LINE
Is a line projected from the vessel icon which indicates the distance your vessel will travel
at the current speed. Selections are 2, 10, 30 minutes, 1, 2 hours and infinite.
7.8
INFORMATION PAGE
From the Main Menu page it is possible to select an Information page containing Software,
Chart and Optional device information.
Figure 7.8 - Information page
1. From the Chart Page, press
[MENU]
twice. Move the ShuttlePoint knob to highlight
About...
and press
[ENT]
or move the ShuttlePoint knob to the right.
2. The Information page appears on the screen (see the previous Figure).
3. Press
[CLR]
or move the ShuttlePoint knob to the left to exit and show the Chart page.
