Page 26
CPV550
b.
SWITCHING TIMEOUT
, the possible choices are 5,10,30 sec, 1, 5, 10 min. Allows
selecting the timing to change from Video Input and CPV550 display.
c.
RESTORE DEFAULTS
, allows restoring the factory defaults for the Input picture
adjustment. When Restore default is executed, the message “OK” is shown next to
the selected menu item.
NOTE (*)
If the video signal is not present on the video connector, the corresponding item in the menu will
be shown with a light color (to identify that the option is not available).
II. Quick Activation by pressing [CLR] for 1 second
Pressing and holding
[CLR]
for 1 second from the Chart page Display or from any main page
(Navigation, Highway, Celestial, GPS Status, DSC, NMEA DISPLAY); the following Soft
Keys are shown:
[FULL SCREEN]
,
[PIP VIEW]
,
[AUTO SWITCH]
. If no video signal is
detected on the Video Input connector, the Soft Keys will be shown in light color in order to
identify that they are not active.
III. Quick Activation by Soft Keys
It is possible to assign the Video Input mode to any of the Soft Keys. Press one of the Soft
Keys, the Soft Keys functions are shown. Pressing and holding for 1 second one of the Soft
Keys, the Soft Keys customization list will be shown. By selecting VIDEO option it will be
possible to assign the Soft Key to execute the Video Input function. Once the Soft Key has
been assigned to Video Input, its label will show the message
[VIDEO]
. If
[VIDEO]
is
ressed, the Soft Keys will be assigned this way:
[FULL SCREEN]
,
[PIP VIEW]
,
[AUTO
SWITCH]
. From now on, the functioning is identical to case II.
