Page 112
CPV550
Figure 19.7.0 - POS REQUEST REPLY menu
The CPV550 has the capability to turn off the Position Request ringer.
1. Select the chart page and press the
[MENU]
key two times. Move the ShuttlePoint knob
to highlight
RADIO SETUP
and press the
[ENT]
key or move the ShuttlePoint knob to
the right.
2. Move the ShuttlePoint knob to highlight
DSC SETTINGS
and press the
[ENT]
key or
move the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight
RINGER OUTPUT
and press the
[ENT]
key or
move the ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to select
POLLING
and press the
[ENT]
key or move the
ShuttlePoint knob to the right.
5. A popup window will be shown with
On
or
Off
, move the ShuttlePoint knob to select
Off
and press the
[ENT]
key or move the ShuttlePoint knob to the right.
6. Press the
[CLR]
key until the menu disappears or an easier method is to move the
ShuttlePoint knob to the left a few times.
If you wish to return to enabling the ringer tone, just repeat the above procedure, moving
the ShuttlePoint knob to select
On
in step “5” above.
Figure 19.7.0 - RINGER OUTPUT menu
19.7.1 Transmitting a Position Request to Another Vessel
Using the Individual directory to make a Position request
1. Select the chart page and press the
[CALL]
key. The “DSC Operation” menu soft keys
will appear below the display.
