Standard Horizon CPV550 Page 25 Owner'S Manual Download | Manualshive

Page: 25 / 148

background image

Page 25

CPV550

2.13 VIDEO INPUT

By accessing this menu it is possible to see images on the CPV550 display from an external
video signal source, if connected to the CPV550.
It allows the “picture-in-picture” functionality, so a Video Input image can be shown on a
window and placed over the Chart, Navigation, Highway, Celestial and NMEA pages image
at full screen.

NOTE

If the Video Input signals are not detected (E.g. the video camera is not connected to the Video

Input connector), the VIDEO INPUT menu item will be grayed out.

2.13.0 Video Camera Input

The CPV550 has two connections for video camera. Any NTSC or PAL camera will operate
correctly. To connect use the video output of the camera and connect to the optional
ACVC10 cable.

2.13.1 VCR or DVD Input

A VCR or DVD may be connected to either Video port. The CPV550 does not have speakers
so the audio from the VCR or DVD would have to be routed to a stereo system. STANDARD
HORIZON offers an optional cable called ACVC10 that allows any VCR or DVD to simply
be plugged into the CPV550.

VCR/DVD

Audio Out

GND

SIGNAL

Video Signal Out

Video Signal GND

STEREO

SYSTEM

Figure 2.13.1 - VCR/DVD Input

The CVP550 has the capability to select the Video Input in three ways.

I. From the menu

1. Press

[MENU]

. Move the ShuttlePoint knob to highlight

SETUP

and press

[ENT]

.

2. Move the ShuttlePoint knob to highlight

VIDEO INPUT

and press

[ENT]

or move the

ShuttlePoint knob to the right. A menu appears with the following options:
a.

ACTIVATE VIDEO

, the possible choices are Full Screen View, PiP (Picture in

Picture) View and Auto Switch (*).
If

Full Screen View

is chosen, the CPV550 will show a warning message with the

instructions to adjust the image from the Video Input. If the user agrees to proceed,
the image from the video input will be shown.
If

Picture in Picture (PiP) View

is chosen, a Video Input image can be shown on

a window and placed over the selected page at full screen. By moving the
ShuttlePoint knob, the PiP image is moved. When the focus is on the PiP image,
press

[CLR]

to close the PiP image.

If

Auto Switch

is chosen, all the menus will be closed and the video input will be

shown switching between the Video Input Full View (if connected) and the selected
page. See next section for details of setting up the switching times. If the user agrees
to proceed, the image from the video input and the CPV550 page will be shown
intermittently. The intermittence time is selected by Switching Timeout item.

«
...
23
24
25
26
27
...
»

Summary of Contents for CPV550





















































































































































Reviews:

No comments

Related manuals for CPV550

Brand: Haiyang Pages: 75

Brand: Cobra Marine Pages: 23

Brand: Navman Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands