LAR 350
8
en
Place the laser unit in the appropriate working position
(vertical or horizontal). To start the laser, press button (3).
Holding this button for a longer period will switch the laser
off again. Activating the self-levelling function causes the
unit to level itself automatically. The laser beam does not (yet)
flash or rotate. Once levelling is completed, the beam stays
on constantly and begins to rotate. Fine adjustments can
still be made within the first 30 seconds. These 30 seconds
are indicated by a slow flashing of the white LED (5).
If the unit is out of alignment by ≥ 5°, it is outside the
self-levelling range and cannot level itself automatically.
In this case the laser continues to flash.
The blue and green LEDs indicate which side of the unit is
too high. Adjust the unit by hand until the LEDs go out.
In vertical operation the device detects the alignment
automatically.
6. Using the Laser Unit
>
±5°
>
±5°
>
±5°
>
±5°
<
±5°
<
±5°
(3)
1x
