LAR 350
18
en
In scan mode the beam does not rotate. Instead, it moves to
and fro rapidly between two points. The eye perceives this
as a laser line.
Button (24) switches the scan function on/off. When it is
switched on, the scan line is always located opposite
button (3) of the laser unit. The thickness of the laser line
can be infinitely adjusted (thicker/thinner) by holding down
button (24) and rotating the remote control unit.
To rotate the scan line to the desired position, hold
down button (23) and rotate the remote control unit.
--> ‘Positioning the Laser Beam’
14. Line Function in Scan Mode
(24)
(23)
(24)
