LAR 350
15
en
Point function
--> p. 15
The laser beam is visible as a point on the target
surface
Canonly be set by remote control
Plumb-line
function
Transfers a determined point from the floor to
the ceiling. To transfer a plumb line from a floor
marking to the ceiling, the laser unit is aligned
exactly with the cross mark with the 4 marking
points (14). The point of intersection of the cross
mark corresponds to the exiting laser plumb line.
In automatic mode a correct result can only be
obtained if the floor surface is level.
Right angle (90°)
In vertical operation, the point laser and the
rotation plane form a 90° angle. This allows
right angles to be created.
Functions
90°
