LAR 350
25
en
Operation with tilt function --> ‘Tilt Function’
30 seconds fine adjustment --> Using the Laser Unit,
Tilt Function
Operation without tilt function
--> ‘Automatic Operation with Relevelling’
--> ‘Manual Operation’
Battery capacity low
--> ‘Battery Insertion/Replacement’
The temperature inside the unit is above 50°C.
To prevent overheating, the laser diode has been
switched off.
Operating in manual mode
--> ‘Manual Operation’
--> ‘Manual Operation with Tilt Function’
--> ‘Rotating and Inclining the Laser Axes’
Laser axes in manual mode without levelling,
--> ‘Displaying the Alignment of the Laser Axes’
--> ‘Inclining the Laser Axes’
--> ‘Inclining and Rotating the Laser Axes’
Laser axis is currently being changed
21. LED Indicators
Unit is outside self-levelling range
--> ‘Using the Laser Unit’
Tilt function initiated
--> ‘Automatic Operation with Tilt Function’
--> ‘Manual Operation with Tilt Function’
Horizontal adjustment currently in progress
Vertical adjustment currently in progress
LED on steadily
LED flashing
