LAR 350
13
en
1x
(4)
9.2 Manual Operation without Tilt Function
In manual operation without tilt function, neither automatic
mode, the tilt function nor relevelling are active. In this
mode the unit is aligned entirely by hand. The unit does not
level itself.
Place the laser unit in the appropriate working position
(vertical or horizontal). Press button (3) x 2 = 1x switch on +
1x deactivate tilt function. Press button (4) x 1 = Changeover
to/activate manual mode. The white LED (5) flashes. The
blue (8) and green (9) LEDs light steadily. The laser beam
rotates. The laser plane can be set up by direction-finding
or by taking measurements.
(3)
2x
(4)
