LAR 350
16
en
The LAR 350 features an innovative remote control unit. It
allows a wide range of functions and settings to be intelli-
gently controlled. Settings are made by pressing the rele-
vant button while simultaneously rotating the remote con-
trol unit in the hand. Fine adjustments can then be made
while holding the unit in this way by touching the buttons
lightly. --> Buttons 21,22,23,24,25,26
The speed of adjustment of settings is determined by the
angle through which the unit is rotated.
To activate the functions of the highlighted buttons (20,21,22),
first press the Shift button (17).
Activation of the Shift button (17) is indicated by the LED (18);
this is switched off after about 30 seconds if no further button
is pressed.
The LED (19) indicates that the unit is transmitting.
The highest setting sensitivity is obtained by
operating the remote control unit while it is
horizontal in the longitudinal plane.
The unit can be adjusted to ensure a symmet-
rical response in the + and - directions. To
do this, place it on a level surface and hold
down buttons (21) and (22) simultaneously for
as long as the LED (19) flashes.
11. Operation with Remote Control
17. SHIFT
18. LED indicator for SHIFT button
19. LED indicator: transmitting
20. TILT
21. Laser x-axis
22. Laser y-axis
23. Position
24. Scan
25. Rotation speed
26. Section
27. Standby
20
23
24
18
25
17
21
22
26
19
27
(22)
(21)
1x
