LAR 350
22
en
In certain applications it can be helpful to align the laser
beam using only a single laser point.
To do this, reduce the rotation speed to zero = point laser
(button 25). --> Rotation Speed
To rotate the laser point to the desired position, hold down
button (23).
Laser planes can also be set up in advance by this method.
Once the unit is then switched to scan or section mode, the
laser beam is directed symmetrically over the set position
of the point laser. The direction of the laser sector or laser
line in scan mode can thus be specified in advance.
17. Positioning the Laser Beam
(23)
(25)
