18
F. Route the speaker wire away from any moving parts and any
sharp metal, then connect to the amplifier
F
G. Connect the B-H1912 & B-H1913 speaker harness to the SSV
Works WP-A360S4 amplifier rear output (green/purple).
G
CONNECTING POWER & GROUND CABLE TO BATTERY (ALL MODELS)
C
B
A2
A3
B. Unscrew the factory nut on the negative battery terminal. Install
the 2 ground cables to the screw on the ground battery terminal.
Re-install the factory nut.
A1. Remove the bottom cover of the fuse holder
by extracting the 2 screws. Break off the right
and left side tabs on the bottom cover.
A2. Extract both fuse holder screws.
A3. Attach both the Power Wire and Battery
Terminal Cable to the fuse holder. Reattach
the bottom cover.
C. Unscrew the factory nut on the positive battery terminal. Install the 2
power cables to the screw on the postive battery terminal. Re-install
the factory nut.
Power
Wire
Battery
Terminal
Cable
A1
Break
off tab
Break
off tab