17
A. Find the best orientation for the speaker on your bar and
screw in the Set Screws in the OPPOSITE holes of where the
clamp will install into.
B. Loosely install the clamp base to the cage mount pod with the
two (2) 8mm M6 hex head bolts and washers, place the cage
mount pod in the desired mounting location on the vehicle.
Once the ring adapter is in the desired position, tighten the two
(2) bolts using a 8mm open wrench.
A
B
C. Place both ring mounting clamps on the cage using the plastic bag to prevent scratching, place the cage mount pod in its final mounting location and
secure to the clamps using the two (2) M6 allen socket head bolts and washers with a 5mm allen key.
C
C
C
CAGE POD KICKER 6.5” SPEAKER (ALL MODELS)
E. From the rear of the center console, route the B-H2195
harness up to each speaker pod and connect.
E
D. Position the speaker to your liking and tighten the hex head
bolts by hand with a 8mm wrench.
D
PLACEMENT OF THE POD DEPENDS ON WHAT TYPE OF ROLL CAGE YOU HAVE (FACTORY OR AFTERMARKET) AND
YOUR PREFERENCE OF WHERE YOU WANT THE PODS TO BE INSTALLED. IN THESE INSTRUCTIONS, WE HAVE
INSTALLED THEM ON THE OUTSIDE VERTICAL BARS AT THE BACK OF THE ROLL CAGE.