User Manual
Embedded EtherNet/IP Module
GS11-EI
25
Advanced Parameters: (as shown above)
The way to obtain IP address
Setting the IP address via software SST-EIP-CFG: The PC configuration software refers to
SST-EIP-CFG. Your users use this software to configure network parameters (user parameter
configuration).
Setting the IP address via host interface (UART): The user board sets the IP address and other
parameters through the UART. The user board sets parameters such as the IP address by
sending an initialization request packet; see section 3.3.
Ethernet/IP connection parameters: The GS11-EI supports 3 sets of connection parameters.
Each set of parameters has input and output. The number of input and output bytes can be any
value from 0 to 256 bytes.