User Manual
Embedded EtherNet/IP Module
GS11-EI
3
1. About the Module
1.1 General
GS11-EI is an embedded EtherNet/IP module and provides instant EtherNet/IP connectivity via the host
interface which is SST defined. Any device that supports the host interface can communicate with GS11-EI
through UART.
1.2 Features
Upgrade your UART or serial device to EtherNet/IP device expediently
Ethernet is 10/100M adaptive
Supports EtherNet/IP Class 1 and Class 3 connections
Provide dedicated configuration software, User-friendly configuration.
Setting the IP address via the UART( Optional Features)
1.3 Specifications
[1]. Support the EtherNet/IP communication protocol that follow ODVA standard.
[2]. GS11-EI provides one Ethernet port and one UART interface (included in the 20-pin connector), can realize
the EtherNet / IP data and serial data conversion;
[3]. Ethernet is 10/100M adaptive
[4]. The size of input and output buffers can be set by users:
The size of input buffer is 256 bytes at most
The size of output buffer is 256 bytes at most
[5]. As an EtherNet / IP server on the Ethernet side, can support 1 EtherNet / IP client to communicate at the
same time, the minimum data update rate is 5ms;
[6]. The serial interface is UART, half duplex, 8 data bits, one stop bit, and no parity, and support 2400,
4800,9600, 19200, 38400, 57600, 115200, 230400 baud rate
