User Manual
Embedded EtherNet/IP Module
GS11-EI
23
Password
（
as shown below
）
User Password: Refers to the password that you need to enter when you click the "advanced
configuration" button on the main screen. After the user password is set, you need to enter this
password when configuring SST-EIP-CFG for user parameters. It is recommended not to set this
password. This password is for your users.
Admin Password: Refers to the password that you need to enter when you click the "advanced
configuration" button on the main screen. After the admin password is set, you need to enter this
password when configuring SST-EIP-CFG for advanced parameters. It is recommended that the
user set this password after the product design is complete, in case your users modify the advanced
parameters.
IP Address Report:
It is used to set the GS11-EI to send a packet that reports its own current IP address, subnet mask, and default
gateway to a port of the specified IP address device, which is sent as UDP. You can enable this function by
