User Manual
Embedded EtherNet/IP Module
GS11-EI
28
Password:
(
as shown below
)
User Password: Refers to the password that you need to enter when you click the "User parameter
configuration" button on the main screen. After the user password is set, you need to enter this
password when configuring SST-EIP-CFG for user parameters. It is recommended not to set this
password. This password is for your users.
IP Address Report:
It is used to set the GS11-EI to send a packet that reports its own current IP address, subnet mask, and default
gateway to a port of the specified IP address device, which is sent as UDP. You can enable this function by
clicking on the "IP Address Report" button in the main interface of SST-EIP-CFG. Click Start and the
SST-EIP-CFG will list all of the messages sent by the devices on the network.