User Manual
Embedded EtherNet/IP Module
GS11-EI
34
After establishing connection successfully, you can click "Stop" to disconnect the connection. The gray
options will be usable after disconnecting, “Stop” button will change to “Run”, and “Transmit” button will change
to be unusable.
7.4 Receive/Transmit Data
In the user-defind protocol operating mode, the test software is the initiator of the communication and the
module responds passively.
Transmit data: After establishing the connection successfully, you can click "Transmit" to transmit data
written in the data transmitting section. The format must be correct, and there is a space in each two bytes (HEX),
and the data length must be the same with “Input data bytes”.
Data receiving: After establishing the connection successfully, you will receive the data transmitted from the
module, and display the data in the data receiving section.
