OWNER’S/OPERATOR’S
MANUAL
14. BATTERY
14-2
can cause serious injury or death.
WARNING
Battery terminals and connections should be kept free of corrosion.
If cleaning is necessary, remove the corrosion with a stiff wire brush. Wash with a
solution of one tablespoon baking soda and one cup water. Rinse well with tap water
and dry off with clean rags. Coat the terminals with dialectic grease or petroleum jelly.
Be careful not to allow cleaning solution or tap water into the battery.
1. Set the battery in its holder.
2. First connect and tighten the red (positive) cable.
3. Second connect and tighten the black (negative) cable.
4. Reinstall the battery cover and attach the hold down straps.
5. Verify that cables are properly routed.
NOTE:
When your UTV is placed in storage for one month or more, the battery should be
removed, charged to proper level, and stored in a cool, dry place.
Before reusing it, take the battery to your dealer for testing and recharging.
Power plug leads may need to be bent down so that battery cover may be installed.
When installing a new battery, make certain it is fully charged prior to its initial use.
Using a new battery that has not been fully charged can damage the battery resulting
in a shorter life of the battery, it can also hinder vehicle performance.
CAUTION
Your UTV is equipped with a 9Ah Battery. This may not be sufficient to provide power
for optional equipment. When installing optional equipment please upgrade your
battery as necessary. See your dealer for the proper battery.
