SSR Motorsports BISON 200P Owner'S/Operator'S Manual Download Page 34

Page: 34 / 86

OWNER’S/OPERATOR’S MANUAL

7. CONTROLS AND PARTS FUNCTIONS

7- 9

belt is not twisted and is not caught on any portion of the vehicle, your clothing, or any

equipment you are carrying.

Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make

sure it is secure.

Put the lap portion of the belt low on your hips. Push down on the buckle end of the

belt as you pull up on the shoulder part so the belt

is snug across your hips.

Position the shoulder belt over your shoulder and across your chest. The shoulder

belt should fit against your chest. If it is loose, pull the belt out all the way and then let

it retract.

To Release The Buckle

firmly press the release button.

WARNING

POTENTIAL HAZARD

Not wearing the seat belt.

Wearing the seat belt improperly.

WHAT CAN HAPPEN

There is increased risk of being killed or seriously injured in an accident.

HOW TO AVOID THE HAZARD

Always wear your seat belt when riding in the vehicle.

Be sure the seat belt is close-fitting across your hips and chest and is latched

securely.

Summary of Contents for BISON 200P























































































Search results

Summary of Contents for BISON 200P

Reviews:

Related manuals for BISON 200P

Brands by name

Popular brands

SSR Motorsports BISON 200P, Owner'S/Operator'S Manual

Search results

Summary of Contents for BISON 200P

Reviews:

Related manuals for BISON 200P

Brands by name

Popular brands