SSR Motorsports BISON 200P Owner'S/Operator'S Manual Download Page 19

Page: 19 / 86

OWNER’S/OPERATOR’S

MANUAL

5. OPERATION WARNINGS

5-3

WARNING

POTENTIAL HAZARD

Operating this vehicle with improper modifications.

WHAT CAN HAPPEN

Improper installation of accessories or modification of this

vehicle may cause changes in handling which in some situations

could lead to an accident.

HOW TO AVOID THE HAZARD

Never modify this vehicle through improper installation or use of

accessories. All parts and accessories added to this vehicle should be

genuine parts or equivalent components designed for use on this

vehicle and should be installed and used according to their instructions.

If you have questions, consult an authorized dealer.

WARNING

POTENTIAL HAZARD

Operating/ riding this UTV without wearing an approved helmet, eye

protection and protective clothing.

WHAT CAN HAPPEN

Operating/ riding without an approved helmet increases your chances

of a severe head injury or death in the event of an accident.

Operating/ riding without eye protection can result in an accident and

increases your chances of a severe injury in the event of an accident.

HOW TO AVOID THE HAZARD

Always wear an approved helmet which fits properly.

You should also wear eye protection (goggles or face shield); gloves;

boots; long-sleeved shirt or jacket; and long pants.

WARNING

POTENTIAL HAZARD

Operating this UTV after drinking alcohol or

using drugs.

WHAT CAN HAPPEN

Could seriously affect your judgment.

Could cause you to react more slowly.

Could affect your balance and perception.

Summary of Contents for BISON 200P























































































Search results

Summary of Contents for BISON 200P

Reviews:

Related manuals for BISON 200P

Brands by name

Popular brands

SSR Motorsports BISON 200P, Owner'S/Operator'S Manual

Search results

Summary of Contents for BISON 200P

Reviews:

Related manuals for BISON 200P

Brands by name

Popular brands