SSR Motorsports BISON 200P Owner'S/Operator'S Manual Download Page 42

Page: 42 / 86

OWNER’S/OPERATOR’S

MANUAL

10. RIDING GEAR

10-2

WARNING

POTENTIAL HAZARD

Operating this vehicle without wearing an approved motorcycle helmet, eye

protection, and protective clothing.

WHAT CAN HAPPEN

Operating without an approved motorcycle helmet increases your chances of a

severe head injury or death in the event of an accident.

Operating without eye protection can result in an accident and increases your

chances of a severe injury in the event of an accident.

HOW TO AVOID THE HAZARD

Always wear an approved motorcycle helmet that fits properly. You should also wear:

eye protection (goggles or face shield), gloves, boots, long-sleeved shirt or jacket

long pants.

Summary of Contents for BISON 200P























































































Search results

Summary of Contents for BISON 200P

Reviews:

Related manuals for BISON 200P

Brands by name

Popular brands

SSR Motorsports BISON 200P, Owner'S/Operator'S Manual

Search results

Summary of Contents for BISON 200P

Reviews:

Related manuals for BISON 200P

Brands by name

Popular brands