SS-16 VoIP-2-GSM USER MANUAL
DOC. NO: SS-16-14 (REV. 02)
Page 12 of 84
5.3
IDENTIFICATION OF CONNECTORS
SS Telecoms SS-16 VOIP-2-GSM features only two external connectors, as
described below. On the bottom panel of the equipment they are, from left to right:
Figure 1: Connectors of SS-16 VOIP-2-GSM
Towards the left edge, the round connector is for the power supply jack, (labelled
DC)
(12V
DC
)
The black Reset button, recessed (
labelled RST
)
To the right, one female RJ45 connector for the local network connections
(labelled ETH
5.4
CONNECTING THE DATA CABLE
.
Figure 2: Connecting the cables
For Ethernet network connection:
Use standard UTP network cable (CUT 5) fitted with RJ45 connectors at both ends.
The cable can be either straight-through or crossover, since the SS-16 VOIP-2-GSM
is auto-crossover.
One short length of RJ-45 cable is supplied with the SS TELECOMS SS-16 VOIP-2-
GSM interface.
Use either a 10Base-T or a 100Base-T connection.
