SS-16 VoIP-2-GSM USER MANUAL
DOC. NO: SS-16-14 (REV. 02)
Page 69 of 84
After the loading of the new firmware is completed, you can restart the SS-16 equipment to start it
operating with the new software.
For this, you may use the “
StartApp
”
button located at the button of the
system menu, at the left of the web
page.
The button will start up the main application software running on SS-16
Warning:
Do not update the firmware unless there are problems with the SS-16
VOIP-2-GSM router or the new firmware has a feature that you need.
Remember to backup the current configuration first. Be careful when loading an
update file. If selecting a wrong file, or if for different reasons firmware
upgrading fails, the equipment may no longer operate correctly. A special
firmware restore will have to be performed.
To avoid this, follow the rules carefully:
-
don’t turn off the SS-16 VOIP-2-GSM equipment or the computer while the
firmware is being overwritten;
-
remember the equipment does not work while firmware update is in progress;
-
after successful updating, verify the upgraded firmware;
-
Remember that updating the firmware on the SS-16 VOIP-2-GSM could cause
some or all of the configuration settings to be lost, depending on the degree of
change in the firmware.
Therefore it is highly recommended to
save
the current configuration before
updating, and then restore it. To backup the settings, perform a Save, update
the firmware, and then load the saved settings, after having the equipment
operating with the updated firmware.
