SS-16 VoIP-2-GSM USER MANUAL
DOC. NO: SS-16-14 (REV. 02)
Page 72 of 84
If wanting to proceed, click the YES button and the equipment will revert to the factory
default settings.
Following a reset, it will start operating with the factory default values for all
parameters.
During the process, “Updating settings please wait!” and a red progress bar, can be
seen as shown below:
CAUTION!
Use this option carefully.
During the process, the SS-16 VOIP-2-GSM will not be available for routing and
connecting to the 3G network. For a few moments, the LAN icon in the status bar will
be barred with a red “x” and the message “A network cable is unplugged” will show
up, indicating that SS-16 VOIP-2-GSM is unavailable.
Hardware factory defaults
“Return to Defaults” can also be performed via
hardware
. This means the Web
interface doesn’t have to be used.
For this, perform the Hardware reset described previously:
Remember to follow the procedure described next because by simply pressing the
recessed
RST button a reset will not be performed. Follow these steps:
-
shut down the SS-16 VOIP-2-GSM device (unplug the power jack)
-
press the RST button and keep it pressed
-
power up SS-16 VOIP-2-GSM
-
wait until all three LEDs light up in red, and then leave the RST button.
