SS-16 VoIP-2-GSM USER MANUAL
DOC. NO: SS-16-14 (REV. 02)
Page 57 of 84
Limit
Limit for incoming calls in seconds.
6.5.5
Outgoing calls
Establishes the rules for outgoing calls, which are calls coming from SIP and directed
to mobile network.
One can define a table with several rules for calls coming in from SIP and going out
through the mobile interfaces.
Each rule may be individually enabled or disabled. The program analyses the
numbering (the prefix) of the phone number called and routes them accordingly
through one of the mobile interfaces.
If one of the mobile ports is disabled, the respective GSM module will NOT be used
for outgoing calls.
Use the
New
button to create a new rule,
Edit
to fill the parameters for it,
Exit
to get
out of the respective row, and
Save
to save the rules created.
The button
Del
is to erase an existing rule from the table.
Example:
If the call has the prefix 0711, it will go out through the interface Mobile2, if it has the
prefix 0710, it will go out through the interface Mobile1, and so on.
The prefix “071f” means 071 followed by any digit (no matter which ones), one must
use this format for compatibility – all the prefixes in the table must have the same
number of digits.
The value “any” in the field “Interface” means that the respective call can be routed
via any of the two modules.
To barr or block a prefix select none as the Interface destination.
