37
Charger 2 Damper™ Installation - Crown Adjust
2 0 0 H o u r S e r v i c e
C h a r g e r 2 D a m p e r ™ I n s t a l l a t i o n - C r o w n A d j u s t
Clean the knob base.
Remove the glide ring, springs, and detent balls from the underside of the
low speed compression knob. Clean the knob.
Install a new glide ring into the groove. Install a spring into the hole on the
underside of the low speed compression knob. Install a detent ball on top
of the spring.
Apply grease to the underside of the low speed compression knob to hold
the spring and ball in place.
1
2
RLC
RLC
RLC
RLC
3
RLC
RLC