25
Charger 2 Damper Removal
Remove the stanchion from the carbon fiber upper.
If the stanchion does not slide out of the carbon fiber upper, the press fit of
the shaft may still be engaged. Reinstall the bottom bolt 2 to 3 turns and
repeat the previous step.
Insert the anchor tool into the bottom of the carbon fiber upper so that it
engages the damper anchor on the Charger 2 Damper™.
Rotate the anchor tool
clockwise
and unthread the Charger 2 Damper
assembly.
Remove the anchor tool and the Charger 2 Damper assembly from the
carbon fiber upper.
Clamp the wrench flats of the Charger 2 Damper assembly in a vise with the
rebound shaft oriented upward.
6
Anchor tool
7
8
30 mm socket & anchor tool
9
