SPX TG H15-50, Instruction Manual, Page: 80 / 110

80
{
9000
0080
0070
0060
0010
0050
A.0500.351 – IM-TGH/07.02 EN (10/2015)
5.1.2 Bearing bracket
5.1.3 Flange connection options
5.1.1 Hydraulic part
Pos. Description Nos./pump Preventive Overhaul
1400 bearing bracket 1
1410 cap head screw 4
1430 bearing housing 1
1440 ball bearing 1 x x
1460 support ring 1
1470 bearing cover 1
1480 set screw 2
1500 locking nut 1
1510 locking washer 1 x x
1540 tap bolt 2
1550 nameplate 1
1560 rivet 4
1600 mesh guard, complete 2
1610 Savetix ® cap head screw - st. steel 4
1620 Savetix
®
washer - st. steel 4
1630 mesh guard - st. steel 2
1610 cap head screw 4
1700 bracket support, complete 1
Pos. Description
Nos./
pump
Preventive Overhaul
0010 R1: pump casing 1
0050
pin
stainless steel
1
Screwed on flanges (optionally)
9000 screw on flanges
1
0060 collar piece 2
0070 loose flange 2
0080 sealing ring 2 x x
Pos. Description Nos./pump Preventive Overhaul
0010 pump casing - thread connection 1
0020 intermediate casing 1
0040 tap bolt 4
0100 top cover, complete 1
0400 jacket cover, on shaft seal 1
0410 countersunk screw 4
0460
plug PQ version 2
plug Gx version 3
0600 idler + bush, complete 1 x
0700 rotor + shaft, complete 1 x
0710 bush bearing, on shaft 1 x
0720 set screw 1
1030 plug 1
1040 sealing ring 1 x x
1050 plug 2
1060 sealing ring 2 x x
1080 tap bolt 4
1090 gasket 1 x
1100 gasket 2 x x
1200 stud bolt 4
1210 plug 1
1220 sealing ring 1 x x
1570 key 1 x x
1580 nut 4
4000 pump cover 1 x