SPX TG H15-50, Instruction Manual, Page: 6 / 110

6 A.0500.351 – IM-TGH/07.02 EN (10/2015)
5.0 Sectional drawings and part lists ____________________________ 79
5.1 TG H2-32 and TG H3-32
________________________________________ 79
5.1.1 Hydraulic part _____________________________________________80
5.1.2 Bearing bracket ___________________________________________80
5.1.3 Flange connection options __________________________________80
5.1.4 S-jacket options ___________________________________________81
5.1.4.1 S-jacket on pump cover __________________________________ 81
5.1.4.2 S-jacket around shaft seal ________________________________ 81
5.1.5 Seal options ______________________________________________81
5.1.5.1 Packing rings – PQ ______________________________________ 81
5.1.5.2 Single mechanical seal – GS ______________________________ 82
5.1.5.3 Double mechanical seal tandem – GG ______________________ 82
5.1.5.4 Double mechanical seal back-to-back – GD _________________ 82
5.2 TG H6-40 to TG H360-150 ________________________________ 83
5.2.1 Hydraulic part
_________________________________________________ 84
5.2.2 Bearing bracket
________________________________________________ 84
5.2.3 Flange connection options __________________________________85
5.2.4 Jacket options _____________________________________________86
5.2.4.1 S-jacket on pump cover __________________________________ 86
5.2.4.2 S-jacket around shaft seal ________________________________ 86
5.2.4.3 T-jackets with flange connections on pump cover ____________ 87
5.2.4.4 T-jackes with flange connections around shaft seal ___________ 88
5.2.5 Shaft seal options _________________________________________89
5.2.5.1 Packing rings PQ with lantern ring
______________________________________________________ 89
5.2.5.2 Packing rings PO without lantern ring _______________________ 89
5.2.5.3 Single mechanical seal – GS ______________________________ 89
5.2.5.4 Cartridge mechanical seal – GC ___________________________ 90
5.2.5.5 Double mechanical seal tandem – GG ______________________ 90
5.2.5.6 Double mechanical seal back-to-back – GD _________________ 90
5.2.5.7 Cartridge mecanical seal - LCT TV (LCT XX) _________________ 91
5.2.5.7 Reverted packing – Chocolate version _____________________ 92
6.0 Dimensional drawings _____________________________________ 93
6.1 Standard pump ___________________________________________ 93
6.1.1 TG H2-32 to TG H3-32 ____________________________________93
6.1.2 TG H6-40 to TG H360-150 _________________________________94
6.2 Flange connections ________________________________________ 95
6.2.1 TG H2-32 to TG H3-32 ____________________________________95
6.2.2 TG H6-40 to TG H360-150 _________________________________95
6.3 Jackets __________________________________________________ 96
6.3.1 TG H2-32 and TG H3-32 ___________________________________96
6.3.2 TG H6-40 to TG H360-150 _________________________________97
6.4 Safety relief valves
___________________________________________________ 98
6.4.1 Single safety relief valve ____________________________________98
6.4.2 Double safety relief valve ____________________________________99
6.4.3 Heated safety relief valve _________________________________ 100
6.5 Bracket support __________________________________________ 101
6.6 Weights – Mass __________________________________________ 101