SPX TG H15-50, Instruction Manual, Page: 7 / 110

7
. . . .
. . . .
. . . .
C 26/06/2015 S.P. S.P.
B 31/05/2012 D.S. D.S.
Rev. Date Drawn Approved
Datum:
Naam:
Date:
Name:
Datum: Rev.
Date:
4.0030.163 Nameplate 55x40 - TopGear Pump
SPX Flow Technology Belgium NV
Evenbroekveld 2-6
BE - 9420 Erpe-Mere
C
Davy Schandevyl
Davy Schandevyl
23/03/2012
31/05/2012
Copyright © restricted according to the law
This information is confidential and proprietary to SPX corporation and its worldwide subsidiaries and affiliates.
It may not be disclosed to anyone, other than SPX personnel, without written authorization from SPX corporation.
Revision description
Getekend door:
Drawn by:
Goedgekeurd door:
Approved by:
.
.
.
EAC logo added
Remarks of Claire Cole
49
3
34
3
SPX Flow Technology Belgium NV
Evenbroekveld 2-6, BE-9420 Erpe-Mere
www.johnson-pump.com / www.spx.com
• Benaming / Description : Nameplate 55x40 - TopGear Pump
• Artikelnummer / Article number : 4.0030.163
• Afgeronde hoeken / Rounded edges : R4mm
•
Ø
gaten /
Ø holes
: 2mm
• Afmeting SPX-logo / Dimensions SPX-logo : 17mm x 4,60mm
• Tekst firmagegevens /
Text company data
:
lettertype / font : Arial regular
lettergrootte /
fontsize
: 5pt
• Afmeting JP-logo / Dimensions JP-logo : 20mm x 2,31mm
A.0500.351 – IM-TGH/07.02 EN (10/2015)
Never lift the pump unit with only two fastening
points. Incorrect lift can cause personal injury
and/or damage to the pump unit.
Always use two or more lifting slings. Make sure
they are secured in such a way as to prevent
them from slipping. The pump unit should be in a
straight fashion.
1.2.3 Storage
If the pump is not commissioned immediately, the shaft should be turned a full turn once every week.
This ensures a proper distribution of the conservating oil.
1.0 Introduction
1.1 General
This instruction manual contains necessary information on the TopGear pumps and must be read
carefully before installation, service and maintenance. The manual must be kept easily accessible to
the operator.
Important!
The pump must not be used for other purposes than recommended and quoted for without
consulting your local supplier.
Liquids not suitable for the pump can cause damages to the pump unit, with a risk of personal injury.
1.2 Reception, handling and storage
1.2.1 Reception
Remove all packing materials immediately after delivery. Check the consignment for damage
immediately on arrival and make sure that the name plate/type designation is in accordance with the
packing slip and your order.
In case of damage and/or missing parts, a report should be drawn up and presented to the carrier at
once. Notify your local supplier.
All pumps have the serial number
stamped on a name plate.
This number should be stated in
all correspondence with your local
supplier.
The first digits of the serial number
indicate the year of production.
1.2.2 Handling
Check the mass (weight) of the pump unit. All parts weighing more than 20 kg must be lifted using
lifting slings and suitable lifting devices, e.g. overhead crane or industrial truck. See section 6.6
Weights – Mass.