STEP 3.
STEP 4.
Use the
to remove left and right cup
holders. (See Fig. 3.)
Hold the handlebars onto the bracket on the pedestals. Then pull the data
cable on the right pedestal through the right handle (C D E). Remove the
tie on the data cable set. Use the
to tighten the bolts with washers, fixing the handlebars in
place on the bracket. Finally, put the left and right cup holders in place and
secure them with the screws. (See Fig. 4.)
PHILLIPS-HEAD SCREWDRIVER
ALLEN WRENCH WITH THE T-SHAPED
HANDLE (6 mm)
→ →
Fig.3
Fig.4
7
