ERROR MESSAGES
1. Display format:
E
R
R
O
R _
X _
Y
_
2. Explanations for each error message:
ERROR_1_1_ The AC servo motor encoder is out of order. Please re-start the unit.
ERROR_1_2_ The AC servo motor is overheated. Speed is restricted to half.
ERROR_1_3_ The AC servo motor suddenly accelerated. Please re-start the unit.
ERROR_2_1_ The IGBT current is too high. Please re-start the unit.
ERROR_2_2_ The IGBT is too hot. Speed is restricted to half.
ERROR_3_1_ The elevation motor has a calibration issue.
ERROR_4_1_ The power switch is OFF.
ERROR_4_2_ The power supply voltage is too low. Re-start the unit after stabilizing
the power supply.
ERROR_4_3_ The power supply voltage is too high. Re-start the unit after
stabilizing the power supply.
27
