-25-
STEP 5
Align the Walk Belt
(a) First, make sure the treadmill is on a leveled surface and the incline is at 0%.
(b) Start the speed at a lower rate of 3kph/2.5mph to check if the walk belt is aligned
and there is an equal amount of space between walk belt and side-rails on both
sides. Turn the rear roller adjustment screw to adjust the walk belt if there is a
misalignment.
(c) Adjust the speed higher to 15kph/10mph or above to ensure the belt is aligned.
(d) Adjust the rear roller screw if necessary to make sure the belt fall in the middle of 2
green labels in the front of the deck and the distance between deck and rear roller
on both sides of walk belt is tolerable.
(e) Let the treadmill run for 2 minutes or more to see if the walk belt moved. If so,
repeat the procedure (d).
(f) Finish adjustment and walk belt is aligned.
＊
Make adjustments as needed, but avoid turning rear roller screws more than one
quarter rotation at a time.
