-13-
Follow steps (a~e) in order to thread the data cable into the right pedestal.
(a) First, remove the zip tie on the cable in the right pedestal mount, and then stretch
the cable out as shown.
(b) Place the right pedestal (A3) on the floor, with the lower hole facing the data cable.
Disconnect the feeder cord (A4) from the bottom of the pedestal. Wrap this feeder
cord around the top of the data cable to secure them together.
(c) Disconnect the feeder cord (A4) at the top of the right pedestal (A3).
(d) Pull the feeder cord (A4) to thread the data cable through the right pedestal (A3).
(e) Once the data cable has been threaded through the pedestal, disconnect the
feeder cord (A4) from the data cable.
Assemble the Left and Right Pedestals and Handlebars (Continued)
STEP 1
