MAINTENANCE
Lubrication System (Continued)
To replace the lubricant bottle, follow instructions (a) through (d) below.
(a) Loosen the screws on the bezel and push the bezel up.
(b) Take the old lubricant bottle out.
(a)
(b)
(c)
(d)
(c)
(d) Place the new lubricant bottle into the lubrication system; push the bezel down and
tighten it with screws. (Note: Before place the new bottle in place, press the pump
a couple of times to ensure the lubricant floats through the hose nicely. Pay
attention to the lubricant hose direction when place the bottle into the system.)
Unscrew the nozzle from the old lubricant bottle and screw it onto new bottle.
Also note the following:
1. Even if the “Lubricant
bottle exchange” warning s
not displaying, it is still OK
to perform the “Lubricant
change procedure”.
2. After replacing the
lubricant, the total
lubrication timer will reset
to 0 and start counting
again.
3. After the “Lubricant bottle
exchange” warning
displayed, the lubrication
system will stop lubricating
automatically. The
lubrication system will
continue lubricating every
1000km (621.4miles) after
the warning is cleared.
4. The lubrication system will
pump twice automatically
once the lubricant
exchanging procedure is
completed to ensure the
new bottle is working
properly.
-51-
