29
STEP 7
Adjust Walk Belt Tightness
7-1. As you exercise, does the walk belt suddenly pause and then regain traction? Or, if
you bear down against the walk belt, does the belt not pause whatsoever? If either
of these two conditions occur, the walk belt may be too loose or too tight. In this
case, please turn off the treadmill and adjust walk belt tightness. To inspect a walk
belt, lift it at the center of the deck as shown in Figure A,B. The walk belt should lift
30m/m<1 1/8"> or 3Kg<6.6LB>. If the walk belt is too loose, turn rear roller screws
clockwise
turn at a time and retest tightness. If the walk belt is too tight, turn rear
roller screws counterclockwise
turn at a time and retest tightness. Perform the
same procedure until the walk belt is neither too tight nor too loose. Do not turn rear
roller screws in excess of these amounts without first testing for proper tightness.
1
4
1
2
Summary of Contents for T652M
