SportsArt Fitness T652M, Instruction Manual

Page: 51 / 56

Lubricating When Not Prompted
Other Periodic Maintenance Tips
The physical task of lubricating the treadmill can be done at any time. When the startup
banner, SPORTSART-T652M, is displayed, simultaneously press and hold INCLINE
+ INCLINE
+ 0 for two seconds. The motor will operate at low speed at which time you
can apply lubricant to the walk belt.
Then the message "PLEASE PRESS THE STOP KEY AFTER FINISHING LUBRICATION"
will appear.
Press the STOP key to complete the lubrication procedure. The treadmill will recalculate
the total distance and operate normally.
Periodic maintenance, in addition to walk belt lubrication, should be performed by an
authorized service technician. We recommend that the following tasks be undertaken at
least every 4000 KM or 2480 miles, or every six months, whichever comes first.
1. Ensure proper power supply. Inspect the power supply, power cord, on/off switch,
etc.
2. Is the treadmill level? Adjust levelers if necessary.
3. Vacuum under the motor cover.
4. Secure all cable connections.
5. Inspect drive belt tightness. Adjust if necessary. Inspect drive belt for wear.
Replace it if necessary.
6. Inspect walk belt tightness. Adjust if necessary. Inspect walk belt for wear. Replace
it if necessary.
7. Wipe the deck clean with a clean, damp cloth. Inspect the deck for wear.
8. Lubricate the deck and walk belt.
9. Wipe entire unit with a clean, damp cloth.
10. Test unit operation. Replace parts if necessary.
Note: For safety, always disconnect power source before removing unit covers. Keep
hands and clothing away from moving parts.
▲
▼
49