SportsArt Fitness T652M, Instruction Manual

Page: 52 / 56

MAINTENANCE CHECKLIST
Like cars, fitness products require maintenance. Regular maintenance extends the life
of your fitness product, and failure to provide regular maintenance will void your
warranty. Copy the maintenance log sheet and record maintenance work.
1. Check the product, including the safety key, for safe operation. Secure any loose
screws. If you have questions about the operation or safety of a product, unplug it
and place an Out-of-Service note on the product until the issue is resolved.
2. Use a clean, lint-free towel, dampened with a mixture of Simple Green and water, to
wipe the product clean. Include the display, grips, handrails, walk belt, and landing
strips. (Do NOT use cleaners with alcohol, ammonia or other damaging chemicals.
Never spray or pour any liquid directly on the product.)
1. Inspect the power cord for damage. Replace if necessary.
2. Make sure handles, pedestals, and other parts are secure, and that screws are tight.
3. Check walk belt tension and alignment. Adjust if necessary. Do not over tighten.
1.
2. Inspect the walk belt and deck for wear. Note: When replacing the walk belt, flip or
replace the walk deck; Always provide a fresh contact surface for a new walk belt.
3.
1. Turn off unit power. To allow capacitors to discharge, wait five minutes before
disconnecting power cord. Remove the motor cover. Vacuum the area around the
drive motor and board. Avoid bumping wires or components.
2. Check drive belt for wear. Replace it if there are cracks or damage. (Note: SportsArt
drive belts last a long, long time. Chances are you will not have to replace a drive
belt within the warranty period.) Align pulleys if needed.
3. Use a clean, lint-free cloth, dampened with a mixture of Simple Green and water, to
clean the rollers and other moving parts.
Daily tasks
Monthly tasks
Quarterly tasks
Half-yearly tasks
Use a lint-free towel and diluted Simple Green to clean the walk deck. Lubricate the
walk deck with SportsArt Hyperglide ubricant, part lube-03, and cancel the
lubrication prompt (see manual). Note that at 2500 miles (4000 KM), SportsArt
treadmills prompt users to lubricate the walk deck.
For DC motor treadmills, remove motor brushes. Remove loose carbon out of the
motor brush area. (Do not breathe or let others breathe motor brush carbon.
Collect it in a damp cloth or vacuum.) Replace brushes when they are under ? inch
long. Note: if used often, your treadmill may require brush maintenance more often.
50