26
07 MAINTENANCE
07
Maintenance
07.1
Maintenance
The operator is committed to check and maintain the Xcontrol-E, which is considered as an electrical system, in
such a way that technical safety is ensured at any time with all relevant laws and standards. The following points
must be checked or carried out at regular intervals:
-
Check circuit breakers, contractors and relays for wear or damage
-
Check connecting lines and cables for damage and fastening
-
Check for dirt or corrosion
-
Check switching operation and control operation
-
Clean fan filter and check fan for proper functioning
-
Carry out „DGUV V3“ inspection („Deutsche
gesetzliche Unfallversicherungs-Vorschrift
3“ Association
of Occpuational Accident Insurance Funds
–
regulation 3“
) or a comparable regulation
Maintenance work may only be carried out by qualified and trained personnel.
07.2
Spare parts
If spare parts are required, SPINOGY is to be contacted.
