10
02 SAFETY INSTRUCTIONS
02.4
Responsibilities and duties of the operator
The operator himself is assumed to have the necessary qualifications and special expertise in handling machine
tools and systems. If the operator does not carry out the necessary work himself, appropriate personnel must be
called in for the professional installation, commissioning, maintenance and repair, dismantling/ decommissioning/
disposal!
In addition to the safety instructions in this manual, the country-specific safety measures, occupational health
and safety measures and environmental protection regulations etc. valid for the application range of the machine
must be observed.
Furthermore, the operator is responsible for the following points:
•
Ensuring that the Xcontrol-E is always in a technically perfect condition
•
Compliance with maintenance intervals
•
Creating of operating instructions
•
Creating of hazard assessments
•
Training and instruction of authorized staff at regular intervals
•
Ensuring that authorized persons using the Xcontrol-E, have carefully read and understood the operating
manual
•
Equipping staff with the appropriate protective equipment
02.5
Modifications and unauthorized changes
Modifications and unauthorized changes at the spindle by the operator are only permitted after consulting
SPINOGY. If unauthorized modifications are made, the issued CE declaration of conformity loses its validity and
the operator legally becomes the machine manufacturer.
02.6
Special hazard warnings
DANGER: Electrical voltage
There is a risk of electric shock, which can lead to serious injury or death. Before working on
the Xcontrol-E, switch it off and disconnect it from the electrical network!
