SPINOGY Xcontrol-E, Operating Manual

Page: 13 / 31

13
04 TECHNICAL DESCRIPTION
There are the following configuration possibilities of the Xcontrol-E:
Frequency inverter
Power [kW] Voltage [V] Type Braking resistor
1,5 230 (1-phase) SVC 70  600 W / 10 s, 2% ED
1,5 230 (1-phase) HF 70  600 W / 10 s, 2% ED
1,5 400 (3-phase) SVC 200  600 W / 10 s, 2% ED
1,5 400 (3-phase) HF 200  600 W / 10 s, 2% ED
2,2 230 (1-phase) SVC 70  600 W / 10 s, 2% ED
2,2 230 (1-phase) HF 70  600 W / 10 s, 2% ED
2,2 400 (3-phase) SVC 200  600 W / 10 s, 2% ED
2,2 400 (3-phase) HF 200  600 W / 10 s, 2% ED
Cable length
Motor connection [m] Sensor connection [m] PE-Protective earth
[m]
Network connection
[m]
Without Without 2 Without
2 2 5 5
5 5 8
8 8
11 11
14 14
Further configuration possibilities
Communication ports Programming frequency inverter Kundenspezifisch
Without Without Without
RJ45 Already programmed Special configurations possible after
consulting SPINOGY
USB
Profibus
Profinet