21 Operations Manual
–
Wall Extruder (Frame Nailer Gen IV and Tables)
Table 5, Control functions (see Figure 2)
Control Function
Description
1
Fire button (Two Hands No Tie Down)
Activates clamps/guns when both buttons are pressed at the
same time
2
Fire button (Two Hands No Tie Down)
Activates clamps/guns when both buttons are pressed at the
same time
3
Reset button
Resets clamps back to the starting point. Can be activated at
any point during operation, up until the guns are fired
4
Emergency Stops
Stops the machines operation, and resets everything back to
their starting positions. These must be deactivated before
operations can recommence
5
Isolation Station switch (Left and
Right stations)
Can choose to use only the right station, only the left station,
or use both
6
Isolation Gun switch
–
Right (Top and
Bottom guns
–
Right side station)
Can choose to use only the top gun, only the bottom gun, or
use both. On the right station only
7
Isolation Gun switch
–
Left (Top and
Bottom guns
–
Left side station)
Can choose to use only the top gun, only the bottom gun, or
use both. On the left station only
8
Cabinet Door Latch
Use to open or lock the control box cabinet
9
Pneumatic Brake button
Activates/Deactivates the Carriage Clamp
10
Trolley Clamp
Allows/Prevents the Nog Trolley from moving
WARNING!
Do not operate Wall Extruder without the correct knowledge and
function of each of the controls.
